Commission XII : Arc welding processes and production systems  (IIW 2017)

1) XII-2311-17 Utilisation of Welding Process Information in the Context of Process Control and System Networking, U. Reisgen, S. Mann, K. Willms, G. Buchholz, P. Lozano (Germany)

2) XII-2314-17 Piezo Actuator Enhanced Gas Metal Arc Welding, Jun Xiao, YangBo Zeng, ShuJun Chen, Jia Liu (China)

3) XII-2310-17 Internal Residual Stress Measurement by Modified Deep Hole Drilling Technique, S.Kawai, M.Shindou, K.Yamamoto, T.Nagai, H.Takeda, T.Nakano, S.Okano, M.Mochizuki and T.Suga (Japan)

4) XII-2313-17 Laser-assisted metal transfer of variable polarity inter-wire indirect arc based on droplet automatically targeting, Liwei Wang, Jun Xiao, Shujun Chen, Yazhou Jia, Yangbo Zeng (China)

5) XII-2315-17 Hybrid PLASMA-MIG Welding Process: Modeling and Technological Experiment, V. Korzhyk, Dong Chunlin, N. Pashchin, O. Babych, and V. Sydorets (Ukraine)

6) XII-2316-17 Investigation on the Activated TIG welding of Cr-Mo-V steels, Jay J. Vora, Vivek Patel, Sagar Suthar, Ashutosh Naik, Darshan Kundal, Ritesh, Patel, Subhash Das (India)

7) XII-2318-17 Single CCD-based sensing of both keyhole exit and weld pool in controlled-pulse PAW, Chuansong Wu, Guokai Zhang (China)

8) XII-2328-17 New GTAW variant for high throughput aluminum welding, E. Siewert, N. Hussary, M. Schnick, M. Dreher, H. Schuster, R. Wagner, S. Eichler (Germany)

9) XII-2319-17 Weld pool oscillation mode and evolution process of pulsed-GTAW welding, K. Zhang, Y. Zhang, J. Chen, S. Wu (China)

10) XII-2330-17 Gap width detection in automated narrow-gap GMAW with varying process parameters, C. Fabry, A. Pittner, M. Rethmeier (Germany)

11) XII-2321-17 Active power measurement in arc welding and its role on heat transfer to the plate, Vinicius Lemes Jorge, Raul Gohrs, Américo Scotti (Brazil)

12) 212-1479-17/XII-2341-17/IV-1342-17/I-1324-17 Active Acoustic Sensor Concept for the Analysis of the Welding Arc Column, U. Reisgen, S. Mann, G. Buchholz, P. Lozano, K. Willms, D. Uhrland, G. Goett, Z. Guokai (Germany)

13) IV-1323-17/XII-2342-17/I-1325-17/212-1501-17 Double-sided Dual Laser Pulse Driven Droplet Transfer in GMAW, YaZhou Jia, Jun Xiao, YangBo Zeng, LiWei Wang, ShuJun Chen (China)

14) 212-1476-17/XII-2343-17/ IV-1343-17/I-1326-17 Numerical analysis of the additional electromagnetic force used to control the fluid flow in high speed GMA weld pool, Chuansong Wu, Lin Wang, Yan Li (China)

15) 212-1471-17/XII-2344-17/ IV-1344-17/I-1327-17 Numerical analysis of plasma arc physical characteristics under additional constraint of keyhole, Bin Xu, Fan Jiang, Manabu Tanaka, Shinichi Tashiro, Nguyen Van Anh, Shujun Chen

16) XII-2324-17/ IV-1345-17/I-1328-17/212-1502-17 Arc instabilities during split anode calorimetry with the TIG welding process, S. Egerland and P. Colegrove (UK, Austria)

17) 212-1493-17/XII-2345-17/IV-1346-17/I-1329-17 Determination of heat input efficiency of reverse polarity arc in aluminum welding through molten pool simulation, H-C. Jeong, K-B. Park, J-H. Cho (Korea)

18) XII-2337-17/IV-1347-17/I-1330-17/212-1503-17 Numerical investigations on the thermal efficiency in laser-assisted plasma arc welding, S. Jäckel, M. Trautmann, M. Hertel, U. Füssel, D. Hipp, A. Mahrle, E. Beyer (Germany)

19) 212-1494-17/XII-2346-17/IV-1348-17/I-1331-17 Comparison and validation of different thermographic methods in steel welding, S-F. Goecke, G. Goett, F. Sikstroem (Germany)

20) XII-2309-17/IV-1349-17/I-1332-17/212-1504-17 Research on Laser-Arc Hybrid Welding of Lap Fillet Joints of Steel Sheet, T.Kobashi, Y.Murai, M.Hadano, T.Era, T.Okamoto, M.Tanaka and T.Suga (Japan)

21) V-1332-17/XII-2347-17/I-1333-17/212-1505-17 Hybrid laser arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support, Ö. Üstündag, A. Fritzsche, V. Avilov, A. Gumenyuk, M. Rethmeier (Germany)

22) IV-1337-17/XII-2348-17/I-1334-17/212-1506-17 Hybrid laser arc welding and CMT welding of Al- steel in butt joint configuration, J. Chen, S. A. Babak, R. Zhang, A. Laver, B. Ronan (Canada)

23) XII-2323-17/IV-1350-17/I-1335-17/212-1507-17 Heat Dissipation for Welding of Mesh Wire by Microplasma Arc Welding, J. He, H. Liu, F. Wang (China)

24) XII-2335-17/IV-1351-17/I-1336-17/212-1508-17 30kW LBW Technique for Manufacturing TF Coils of International Thermonuclear Experimental Reactor (ITER), Y.Goto, T. Ogawa, M. Otsuki, Y. Makino, S.Asai, S.Ando, K.Takano, N.Koizumi (Japan)

25) I-1309-17/XII-2349-17/IV-1352-17/212-1509-17 A metallurgical investigation of the laser additive manufacturing repair of ferrous alloys, Manuel Marya*, Viendra Singh*, Jean -Yves Hascoet and Surendar Marya (*USA, France)

26) XII-2340-17/IV-1353-17/I-1345-17/212-1510-17 LASIMM - AM production of large scale engineering structures, E. Assunção, L. Quintino, F. Martina, S. Williams, I. Pires, A. Lopez (Portugal)

27) I-1299-17/XII-2350-17/ IV-1354-17/212-1511-17 Investigation on Capability of CMT Process on Producing Inclined Thin-wall Aluminum Parts, Yun Zhao, Shujun Chen, Jun Xiao, Fang Li (China)

28) XII-2332-17/IV-1355-17/I-1337-17/212-1512-17 Investigation of arc control methods for GMAW Additive Manufacture of Titanium alloy, Jialuo Ding, Goncalo Rodrigues Pardal, Armando Caballero, and Stewart Williams (UK)

29) XII-2333-17/IV-1356-17/I-1338-17/212-1513-17 Numerical simulation of WAAM process by a GMAW weld pool model, Y. Ogino, S Asai and Y. Hirata (Japan)

30) IV-1330-17/XII-2351-17/I-1339-17/212-1514-17 Powder- and wire-based laser metal deposition in coaxial arrangement using Inconel 718, F. Silze, N. Brocke, M. Schnick (Germany)

31) I-1298-17/XII-2352-17/IV-1357-17/212-1515-17 Wire Melting and in Surface Tension Driven Wire- Resistance-Heating Additive Manufacturing, Chengwei Yuan, Shujun Chen, Zhenyang Lu,Jun Xiao, Zhihong Yan, Lilai Bai (China)

32) I-1300-17/XII-2353-17/IV-1358-17/212-1516-17 Additive Processes of Laser-Plasma and Laser Cladding of Powder Materials, V. Korzhyk, Dong Chunlin, V. Khaskin, V. Sydorets, and I. Klochkov (China)

33) I-1301-17/XII-2354-17/IV-1359-17/212-1517-17 The effect of the deposition direction in single- pass multi-layer GMAW based additive manufacturing, Zhang Guangjun, Yang Dongqing (China)

34) IV-1328-17/XII-2355-17/I-1343-17/212-1518-17 Wire Based Electron Beam Additive Manufacturing, B. Baufeld, R. Widdison, T. Dutilleu (UK)

35) XII-2312-17/IV-1360-17/I-1344-17/212-1519-17 Stereolithographic Additive Manufacturing of Ceramic Components with Functional Structures, S. Kirihara (Japan)

36) I-1302-17/XII-2356-17/IV-1361-17/212-1520-17 Adaptive process control of wire and arc additive manufacturing for complex shape components, Fang Li, Shujun Chen, Junbiao Shi, Yun Zhao, Hongyu Tian (China)

37) I-1303-17/XII-2357-17/IV-1362-17/212-1521-17 3DPMD – Arc-based additive manufacturing with titanium powder as raw material, K. Hoefer, A. Haelsig, P. Mayr (Germany)

38) I-1305-17/XII-2358-17/IV-1363-17/212-1522-17 Wire based additive manufacturing with GMAW – Researches on temperature and time towards homogeneous material properties, Philipp Henckell, Yarop Ali, Karsten Guenther, Jean Pierre Bergmann (Germany)

39) I-1306-17/XII-2359-17/IV-1364-17/212-1523-17 Hot wire assisted GMAW of Ni-base hardfacings reinforced with fused tungsten carbides – influence of process conditions on the microstructural properties, Karsten Guenther, Philipp Henckell, Yarop Ali, Jean Pierre Bergmann (Germany)

40) I-1308-17/XII-2360-17/IV-1365-17/212-1524-17 Understanding metallurgical bonding formation during successive deposition of fully molten metal droplet for expanding applications of plasma spraying, Chang-Jiu Li, Jun Wang, Jia-Jia Tian, Cheng-Xin Li, Guan-Jun Yang (China)

41) XII-2322-17 Pulsed Ultrasonic Wave Assisted GMAW Welding, C. Fan, L. Zhou, C. Yang, S. Lin, W. Xie (China)

42) XII-2336-17 Probing joint strength and distortion in gas metal arc lap joining of aluminium and steel sheets, Sven-F Goecke, P. Makwana, M. Shome and A. De (Germany)

43) XII-2325-17 Digitalized Automated Welding Systems for Weld Quality Predictions and Reliability, E.A. Gyasi, P. Kah, J. Kinnunen, S. Penttila (Finland)

44) XII-2326-17 Narrow Gap Welding using Cored Wires, Vishvesh J. Badheka (India)

45) XII-2327-17 Investigation on material transfer and melting losses of solid and flux-cored wires in submerged arc welding through high speed imaging of the cavern, A. Gericke, G. Goett, D. Uhrlandt, K.-M. Henkel (Germany)

46) XII-2329-17 Method Exploration of Flux Bands Constricting Arc Plug Welding for T-Joints of High- Strength Steel Sandwich Panel, Wang Lei, Qiao Jisen, Zhu Liang, Chen Jianhong (China)

47) XII-2320-17 Arc Behavior and Metal Transfer in Multi-electrodes Welding Process, S.Chen, L.Zhang, F.Jiang, X.Jiang (China)

48) XII-2331-17 In-situ Measurement of Weld Pool Configuration Using Laser Ultrasonic Technique, S. Asai, K. Nomura, Y. Mine, F. Imura and R. Kita (Japan)

49) XII-2334-17 Using AC GMAW to Increase Welding Productivity on Thin Steel Components, Judah B. Henry, Daniel P. Fleming (USA)

50) XII-2338-17 Increasing aluminum-textil-bonding strength using a GTAW-DC-EP process for surface structuring, M. Lohse, M. Gueltner, M. Lammers, M. Hertel, U. Füssel (Germany)